절연저항측정기에 Fluke멀티미터가 한 장비로 합쳐진 절연저항 멀티미터
원격프루브를 사용하여 프루브에서 절연테스트를 할 수 있습니다.


*절연저항 측정

1507: 0.01 MΩ to 10 GΩ


* 테스트 전압

1507: 50 V, 100 V, 250 V, 500 V, 1000 V


* 전압측정 : 0.1 V to 600 V
* 전류측정 : 200 mA
* 저항측정 : 0.01 Ω to 20.00 kΩ
* 오토OFF 기능
* 30V 이상에서 측정시 경고

< 상세설명 >

  • 분극지수(PI: Polarization Index)와 유전 흡수율(DI: Dielectric Absorption Ratio)
    자동 계산 (FLUKE 1507)
  • 반복 테스트시 간단히 사용할 수 있는 비교(Pass/Fail) 기능.(FLUKE 1507)
  • 반복 테스트와 장비의 접근이 어려운 장소에서 사용이 편리한 리모트 테스트
    프로브 지원
  • 30V 이상 전압 검출시 자동으로 절연 테스트 중지되어 사용자를 보호.
  • 사용자 보호를 위해 충전 전압 자동 방전.
  • AC/DC 전압 측정 범위 : 0.1V ~ 600V
  • 저항 측정 범위 : 0.01Ω ~ 20.00KΩ
  • 자동 꺼짐 기능.
  • 크고 밝은 백-라이트 디스플레이.
  •  카테고리 CAT III - 1000V, CAT IV - 600V
  •  포함 액사사리 : 리모트 프로브, 테스트리드, 악어 클립.
  •  1000이상 절연 테스트 가능(AA alkaline battery 4개 사용)
  •  1년간 품질 보증.


     

    AC/DC Voltage Measurement
    Accuracy
    Range 600.0 V
    Resolution 0.1 V
    50 Hz to 400 Hz ± (% of Rdg + Digits) ± (2 % + 3)
    Input impedance
      3 MΩ (nominal), < 100 pF
    Common mode rejection ratio (1 kΩ unbalanced):
      > 60 dB at dc, 50 or 60 Hz
    Overload Protection
      600 V rms or dc

     

    Earth bond resistance measurement
    Range/Resolution
    20.00 Ω 0.01 Ω
    200.0 Ω 0.1 Ω
    2000 Ω 1.0 Ω
    20.00 kΩ 0.01 kΩ
    Accuracy
      ± (1.5 % + 3)
    Overload Protection
      2 V rms or dc
    Open Circuit Test Voltage
      > 4.0 V, < 8 V
    Short circuit current
      > 200.0 mA

    Insulation specifications
    Measurement Range
    1507: 0.01 MΩ to 10 GΩ
    1503: 0.01 MΩ to 2000 MΩ
    Test voltages
    1507: 50 V, 100 V, 250 V, 500 V, 1000 V
    1503: 500 V, 1000V
    Test Voltage Accuracy
      + 20 %, - 0 %
    Short circuit current
      1 mA nominal
    Auto Discharge
      Discharge time < 0.5 second for C = 1 µF or less
    Live circuit indicator
      Inhibit test if terminal voltage > 30 V prior to initialization of test
    Maximum Capacitive Load
      Operable with up to 1 µF load
    Measure Accuracy:
    50 V: ±(3 % + 5)
    100 V: ±(3 % + 5)
    250 V: ±(1.5 % + 5)
    500 V: ±(1.5 % + 5)
    1000 V: ±(1.5 % + 5) to 2000 MΩ, ±(10 % + 3) above 2000 MΩ

     

    General Specifications
    Maximum voltage applied to any terminal:
      600 V ac rms or dc
    Storage Temperature
      -40 °C to 60 °C (-40 °F to 140 °F)
    Operating Temperature
      -20 °C to 55 °C (-4 °F to 131 °F)
    Temperature Coefficient
      0.05 x (specified accuracy) per °C for temperatures < 18 °C or > 28 °C (< 64 °F or > 82 °F)
    Relative Humidity
      0 % to 95 % @ 10 °C to 30 °C (50 °F to 86 °F)
      0 % to 75 % @ 30 °C to 40 °C (86 °F to 104 °F)
      0 % to 40 % @ 40 °C to 55 °C (104 °F to 131 °F)
    Vibration
      Random, 2 g, 5-500 Hz per MIL-PRF-28800F, Class 2 instrument
    Shock
      1 meter drop per IEC 61010-1 2nd Edition (1 meter drop test, six sides, oak floor)
    Electromagnetic compatibility:
      In an RF field of 3 V/M, accuracy = specified accuracy (EN 61326-1:1997)
    Safety
      Complies with ANSI/ISA 82.02.01 (61010-1) 2004, CAN/CSA-C22.2 NO. 61010-1-04, and IEC/EN 61010-1 2nd Edition for measurement category IV 600 V (CAT IV)
    Certifications:
      CSA per standard CSA/CAN C22.2 No. 61010.1-04; TUV per standard IEC/EN 61010-1 2nd Edition
    Batteries
      Four AA batteries (NEDA 15A or IEC LR6)
    Battery Life
    Insulation test use: Tester can perform at least 1000 insulation tests with fresh alkaline batteries at room temperature. These are standard tests of 1000 V into 1 MΩ with a duty cycle of 5 seconds on and 25 seconds off.
    Resistance measurements: Tester can perform at least 2500 earth bond resistance measurements with fresh alkaline batteries at room temperature. These are standard tests of 1 Ω with a duty cycle of 5 seconds on and 25 seconds off.
    Size
      5.0 cm H x 10.0 cm W x 20.3 cm L (1.97 in H x 3.94 in W x 8.00 in L)
    Weight
      550 g (1.2 lb)
    IP Rating
      IP40
    Altitude
    Operating: 2000 m CAT IV 600 V, 3000 m CAT III 600 V
    Non-operating (storage): 12,000 m
    Over-range capability:
      110 % of range
    Included accessories:
      TL224 Test Leads, TP74 Test Probes, clips PN 1958654 (red) and PN 1958646 (black), holster and remote probe